Arcade1UP Angled Control Deck Upgrade Kit (Angled Spacers, Screws, & Washers)

Description

Arcade1UP Angled Control Deck Upgrade Kit (Angled Spacers, Screws, & Washers)
This kit is the perfect addition to your Arcade1Up cabinet!
I never paid much attention to the flat control decks on all of my Arcade1UP cabinets until I purchased Golden Tee.  With Golden Tee, the deck design was changed from being flat to an angle which felt more like the real arcade machine.  So I began looking at how I could change my existing machines to angle the control deck.  This kit is the result.
The
Angled Control Deck Upgrade Kit
was designed to add a slight angle to the Arcade1UP control deck and to provide a more finished look to your machine.  In addition to adding an angle, it also helps prevent cracking the protective clear control deck cover from over-tightening the stock screws.
The kit consist of:
Two custom designed and 3D printed angle wedges with aligned screw holes to match the deck.
Four longer flat head screws.
Four raised washers.
The before and after photos gives you an idea of how much of an angle this kit provides.  It actually makes the control deck blend with the vertical curve of the side cabinet.
Installation is easy.  Start by removing the existing four deck screws (they will not be used), lift up the control deck, put the wedges in place (aligning them with the existing screw holes), replace the control deck, and then use the replacement screws and raised washers to secure the deck.
I have installed this on all of my standard cabinet machines.  I do not have any wide deck machines (NBA Jam, TMNT, etc.) to test this on so I do not know if it will work as it does with the regular control decks.
All wedges are printed black to blend in with the machine so it looks like it is an original part of the cabinet.
Shipped with USPS First Class.